news

EC11 Electrochemical CO Sensor – Accurate Carbon Monoxide Detection for Safety-Critical Applications

The EC11 Carbon Monoxide Sensor is an advanced electrochemical gas sensor engineered to detect trace levels of CO with superior accuracy, repeatability, and reliability. Designed for integration into safety-critical systems, the EC11 sensor helps manufacturers build smarter, safer gas detection solutions across residential, commercial, and industrial sectors.


Why Accurate CO Detection Matters

Carbon monoxide (CO) is a silent killer—colorless, odorless, and extremely toxic even at low concentrations. Exposure to just 200 ppm can cause severe symptoms, while prolonged exposure to 1000 ppm is life-threatening. Early and accurate detection is essential for preventing poisoning incidents in enclosed environments.

The EC11 sensor delivers high-sensitivity monitoring of CO levels in real time, making it ideal for:

  • Residential gas alarms

  • HVAC systems with smart ventilation

  • Building air quality sensors

  • Fire and safety detection devices

  • Portable gas detectors for workers in confined spaces


EC11 Sensor Working Principle

The EC11 sensor operates based on electrochemical fuel cell technology. Carbon monoxide diffuses through a gas-permeable membrane and undergoes a redox reaction with oxygen at the sensor’s working and counter electrodes. This electrochemical reaction generates an electrical current directly proportional to the CO concentration in accordance with Faraday’s Law.

The linear output and minimal cross-sensitivity make it easy to interpret sensor signals and convert them into ppm readings using simple analog circuitry or ADC modules.


Advantages of EC11 in System Integration

  • Linear Output Curve: Allows direct analog signal processing and easier calibration.

  • Ultra-Low Power Consumption: Ideal for IoT and battery-powered devices.

  • Compact Form Factor: Easily fits into compact enclosures or portable units.

  • Robust Signal Stability: Excellent repeatability and minimal zero drift across a wide temperature and humidity range.

  • Extended Shelf & Operating Life: Stable for up to 2 years with minimal maintenance.

Parameter Specification
Sensor Type Electrochemical (fuel cell)
Target Gas Carbon Monoxide (CO)
Detection Range 0–1000 ppm
Overrange Capacity Up to 2000 ppm
Sensitivity 1–3 nA/ppm
Resolution 1 ppm
Response Time (T90) < 30 seconds
Load Resistance 500–2000 Ω recommended
Temperature Range -20°C to +50°C
Humidity Range 15% to 90% RH (non-condensing)
Pressure Range 1 atm ±10%
Repeatability < 3% of reading
Zero Drift < 5 ppm (-20°C to +40°C)
Typical Lifespan ≥ 2 years

Cross-Interference Reference Table

To help users evaluate system behavior in multi-gas environments, EC11’s response to common interfering gases is as follows:

Interfering Gas Conc. (ppm) Typical EC11 Response
Hydrogen 500 43 ppm
Ethylene 100 80 ppm
Nitric Oxide 35 8 ppm
Ammonia 50 1 ppm
Acetone 100 3.5 ppm
Chlorine 10 1 ppm
Benzene 100 1.5 ppm

Note: All data are typical values and should be verified in the intended environment for accuracy.


Design Precautions

When integrating the EC11 sensor into a product:

  • Do not solder directly onto the sensor body.

  • Avoid contact with solvents, adhesives, or silicone materials.

  • Prevent airflow from directly hitting the sensor surface vertically.

  • Store electrodes shorted and avoid oxygen-deprived environments.

  • Do not seal the sensor with resins or hot-melt adhesives (>80°C).

  • Protect from corrosive or alkaline gases during use and storage.


Conclusion

With its balance of precision, reliability, and integration flexibility, the EC11 carbon monoxide sensor is the trusted choice for product engineers and safety system developers. Whether you’re building smart home alarms, industrial detectors, or wearable gas monitors, EC11 delivers the performance you need to protect lives.

Contact our technical team to request EC11 datasheets, integration guides, or OEM quotes.